2025 800-150 Passleader Review | Pass-Sure 100% Free Latest 800-150 Exam Cost
DOWNLOAD the newest RealExamFree 800-150 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1hMKE_PcRNYBCZwCCv6RH0vqFu8m7zyC7
Some candidates may be afaind of the difficult questions in the 800-150 study materials for they are hard to be understood and memorized. But if you want to pass the exam perfectly, then you have to pay more attention on them. You must cultivate the good habit of reviewing the difficult parts of our 800-150 Practice Guide, which directly influences your passing rate. What is more, our experts never stop researching the questions of the real 800-150 exam. So our 800-150 exam questons are always the latest for you to download.
Cisco 800-150 Exam Syllabus Topics:
Topic
Details
Topic 1
Topic 2
Topic 3
>> 800-150 Passleader Review <<
Cisco 800-150 Exam | 800-150 Passleader Review - One Year Free Updates of Latest 800-150 Exam Cost
If you are aiming to become a certified Cisco 800-150, you should prepare with actual exam questions and study guides. These study materials will enable you to pass the exam without much difficulty. Cisco's practice exams will help you prepare well for the actual exam. The questions are updated and easy to understand. The test materials also consist of a realistic scenario that simulates the exam environment.
Cisco Supporting Cisco Devices for Field Technicians Sample Questions (Q53-Q58):
NEW QUESTION # 53
Drag and drop the safety actions that must be taken prior to beginning work into order on the right for working with electrical equipment.
Answer:
Explanation:
Explanation:
In theFLDTEC course, underSafety and ESD Procedures, Cisco outlines the following safety workflow before working on any network hardware:
* Locate Emergency Power-Off Switch: Identifying how to cut power quickly is essential in case of an electrical fault or emergency.
* Disconnect Power: Always ensure the power source is turned off and disconnected before handling any components.
* Verify with Multimeter: Use a multimeter to confirm that no voltage is present before proceeding.
* Connect ESD Strap: Once confirmed safe, attach your ESD strap to a grounded point to prevent electrostatic damage to sensitive components.
Following this process is critical not only forpersonal safetybut also forequipment protection, especially duringhardware installation, maintenance, or RMA replacements.
NEW QUESTION # 54
Which two devices are most commonly used in a WAN environment? (Choose two.)
Answer: B,C
Explanation:
In the context ofWide Area Networks (WANs), the key objective is to connect geographically separated networks using service provider infrastructure. The FLDTEC course emphasizes that WAN environments typically involve devices that can handle different physical transmission mediums and protocols.
Modems:
* Modulate and demodulate analog signals to digital signals.
* Used in WAN environments to connect over analog lines like DSL or leased lines.
* Essential for interfacing between digital routers and analog telephone networks.
Optical Fiber Converters:
* Also known asmedia converters, they are used to convert electrical signals to optical signals (and vice versa) for fiber transmission.
* Common in WAN scenarios where long-distance high-speed transmission over fiber is required.
Incorrect Options:
* A. Hubs: Obsolete Layer 1 devices used in LANs, not suitable for WANs.
* D. Network Interface Cards (NICs): Used in end devices for LAN connectivity.
* E. Wireless Access Points: Typically used in WLANs within local premises, not WAN infrastructure.
This aligns withCisco's WAN architecture fundamentalsas highlighted in FLDTEC under "Cisco Equipment and Related Hardware."
NEW QUESTION # 55
Drag and drop the steps of the boot sequence process of a Cisco device into order on the right.
Answer:
Explanation:
Explanation:
Step 1 # Performs power-on self-test (POST)
Step 2 # Loads and runs bootstrap code (firmware)
Step 3 # Finds and loads the Cisco IOS software
Step 4 # Finds and loads the configuration
Step 5 # Runs the configured Cisco IOS software
This startup process is thoroughly described in theFLDTECcourse and alignswith Cisco's standard IOS boot process:
* POST (Power-On Self-Test):Verifies hardware functionality including memory and interfaces. This occurs immediately upon powering the device.
* Bootstrap Code Execution:Bootstrap is a small program in ROM that initiates the boot process.
* Cisco IOS Loading:Bootstrap locates and loads the IOS from flash memory or another source (e.g., TFTP).
* Configuration Loading:The router then loads the startup-config from NVRAM (if available).
* IOS Execution:Once the configuration is loaded, the device enters operational mode and executes the IOS with the loaded config.
This sequence is vital for field technicians to understand for troubleshooting boot failures or performing device recoveries.
NEW QUESTION # 56
Which two network design strategies in Cisco data center solutions improve fault tolerance and high availability? (Choose two.)
Answer: A,C
Explanation:
To ensurehigh availability and fault tolerancein Cisco data center designs, two effective strategies include:
* Redundant Supervisor Engines and Fabric Modules: These provide failover capabilities, so if one supervisor or fabric module fails, another can take over, maintaining network operations without interruption.
* Virtual Port Channels (vPCs): vPCs allow connections to be made to two physical switches while appearing as one logical switch. This prevents loops and adds redundancy and load balancing, which is critical in high-availability environments.
Other options may enhance performance (e.g., high-density Ethernet) or extend functionality (e.g., FCIP), but do not directly contribute to fault tolerance and high availability in the same way.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco Equipment and Related Hardware
NEW QUESTION # 57
Which two cloud computing services are vendor-managed in an Infrastructure as a Service (IaaS) delivery model? (Choose two.)
Answer: A,B
Explanation:
In theInfrastructure as a Service (IaaS)model, the cloud provider is responsible for managing and maintaining the underlying infrastructure components, including:
* Networking: The cloud provider handles all aspects of network configuration, hardware, and virtual networking.
* Storage: The cloud provider supplies and manages the physical and virtual storage infrastructure required to support the consumer's data needs.
The customer is responsible for managing:
* Operating Systems
* Applications
* Data
This model offers flexibility while shifting infrastructure maintenance responsibilities to the service provider.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco Licensing and Smart Licensing
NEW QUESTION # 58
......
RealExamFree Cisco 800-150 Exam Questions are made in accordance with the latest syllabus and the actual Cisco 800-150 certification exam. We constantly upgrade our training materials, all the products you get with one year of free updates. You can always extend the to update subscription time, so that you will get more time to fully prepare for the exam. If you still confused to use the training materials of RealExamFree, then you can download part of the examination questions and answers in RealExamFree website. It is free to try, and if it is suitable for you, then go to buy it, to ensure that you will never regret.
Latest 800-150 Exam Cost: https://www.realexamfree.com/800-150-real-exam-dumps.html
2025 Latest RealExamFree 800-150 PDF Dumps and 800-150 Exam Engine Free Share: https://drive.google.com/open?id=1hMKE_PcRNYBCZwCCv6RH0vqFu8m7zyC7
